EAS XIprog is our in-circuit Xilinx JTAG
programmer. It can be used to program Xilinx FPGA and CPLD's using the pc parallel
XIprog schematic (.pdf), layout (.pdf), and parts list.
Circuit based on Xilinx Parallel Download Cable schematic.
Male DB25 connector to PC parallel port.
Low parts count.
Compact size, 2.5" X 2".
Compatible with any Xilinx FPGA's and CPLD's that can accept TTL level programming signals. Tested and verified to program XC3000, XC4000, XC9500 and Spartan2 devices. Maybe compatible with other Xilinx FPGA's but not tested yet.
Can be used to program 3.3Volt Xilinx parts.
Same connector pinout configuration as Xilinx Parallel Cable III model DLC5 programmer.
Professional quality board with silkscreen.
Requires external 3.3 or 5 Volt DC supply. This is usually supplied by the target board's JTAG/FPGA programming header.
XIprog has been tested to work with Xilinx Foundation, Foundation ISE and ISE WebPACK development software.
Bare PC Board: $5.00
No assembled units or parts kit are available. Bare PC boards are in stock.
Please include $5 shipping and handling for destinations within the continental United States. All other areas, please contact us for shipping charges.
For those only interested in purchasing a single bare pcb board, shipping and handling can be avoided by sending us the cost of the pcb and include a self addressed stamped envelope with your order. Please attach three first class stamps to the envelope with your legible return address. We suggest using cardboard floppy disks envelopes that can be purchased at office supply stores. US only.
Back to home